-- *********************************************************************
-- CISCO-SYSLOG-EXT-MIB.my: Syslog Extension MIB
--
-- October 2002, Vinay Gaonkar
--
-- Copyright (c) 2002, 2003, 2004, 2005 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************CISCO-SYSLOG-EXT-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Unsigned32FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
TruthValue,RowStatus,TEXTUAL-CONVENTIONFROM SNMPv2-TC
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
InetAddressType,InetAddress,InetPortNumberFROM INET-ADDRESS-MIB
ciscoMgmt FROM CISCO-SMI
SyslogSeverity FROM CISCO-SYSLOG-MIB;ciscoSyslogExtMIB MODULE-IDENTITYLAST-UPDATED"200501300000Z"ORGANIZATION"Cisco Systems Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"DESCRIPTION"MIB module for configuring and monitoring System Log
related management parameters as defined by RFC 3164."REVISION"200501300000Z"DESCRIPTION"- Added SylogProtocol TEXTUAL CONVENTION.
- Added following objects in cseSyslogServerTable.
cseSyslogServerProtocol
cseSyslogServerPort
cseSyslogServerProtocolFallback
"REVISION"200409200000Z"DESCRIPTION"Added new enumerations isns, fccLc, cfs, dstats, ipsec,
dpvm, ike, ddas, scheduler, san ExtTuner to
SyslogExFacility."REVISION"200312150000Z"
DESCRIPTION"Added new enumerations to SyslogExFacility."REVISION"200211130000Z"DESCRIPTION"Added cseSyslogServerFacility to cseSyslogServerTable.
Added two TCs SyslogFacility and SyslogExFacility."REVISION"200210040000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 301}ciscoSyslogExtMIBObjects
OBJECTIDENTIFIER::={ ciscoSyslogExtMIB 1}cseSyslogConfigurationGroup OBJECTIDENTIFIER::={ ciscoSyslogExtMIBObjects 1}-- Textual ConventionsSyslogFacility ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The Syslog standard facilities.
kernel (0) - Kernel
user (8) - User Level
mail (16) - Mail System
daemon(24) - System Daemon
auth (32) - Security/Authorization
syslog (40) - Internal Syslogd
lpr (48) - Line Printer subsystem
news (56) - Network New subsystem
uucp (64) - UUCP subsystem
cron (72) - Clock Daemon
authPriv (80) - Security/Auth(private)
ftp (88) - FTP Daemon
local0 (128) - Reserved local use
local1 (136) - Reserved local use
local2 (144) - Reserved local use
local3 (152) - Reserved local use
local4 (160) - Reserved local use
local5 (168) - Reserved local use
local6 (176) - Reserved local use
local7 (184) - Reserved local use."REFERENCE"RFC 3164 - The BSD Syslog Protocol, Section 4."SYNTAXINTEGER{kernel (0),-- Kerneluser (8),-- User Levelmail (16),-- Mail Systemdaemon(24),-- System Daemon
auth (32),-- Security/Authorizationsyslog (40),-- Internal Syslogdlpr (48),-- Line Printer subsystemnews (56),-- Network New subsystemuucp (64),-- UUCP subsystemcron (72),-- Clock DaemonauthPriv (80),-- Security/Auth(private)ftp (88),-- FTP Daemonlocal0 (128),-- Reserved local uselocal1 (136),-- Reserved local use
local2 (144),-- Reserved local uselocal3 (152),-- Reserved local uselocal4 (160),-- Reserved local uselocal5 (168),-- Reserved local uselocal6 (176),-- Reserved local uselocal7 (184)-- Reserved local use}SyslogExFacility ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The Syslog facilities including both standard and
proprietary facilities.
kernel (0) - Kernel
user (8) - User Level
mail (16) - Mail System
daemon(24) - System Daemon
auth (32) - Security/Authorization
syslog (40) - Internal Syslogd
lpr (48) - Line Printer subsystem
news (56) - Network New subsystem
uucp (64) - UUCP subsystem
cron (72) - Clock Daemon
authPriv (80) - Security/Auth(private)
ftp (88) - FTP Daemon
local0 (128) - Reserved local use
local1 (136) - Reserved local use
local2 (144) - Reserved local use
local3 (152) - Reserved local use
local4 (160) - Reserved local use
local5 (168) - Reserved local use
local6 (176) - Reserved local use
local7 (184) - Reserved local use
vsanMgr (200) - VSAN Manager
fspf (208) - FSPF
domainMgr (216) - Domain Manager
mtsDaemon (224) - MTS Daemon
linecardMgr (232) - Line Card Mgr
sysMgr (240) - System Manager
sysMgrLib (248) - System Mgr Library
zoneServer (256) - Zone Server
virtualIfMgr (264) - VirtualInterface Mgr
ipConfMgr (272) - IP Config Manager
ipfc (280) - IP Over FC
xBarMgr (288) - Xbar Manager
fcDns (296) - Fibre Channel DNS
fabricConfMgr (304)- Fabric Config Server
aclMgr (312) - AccessControlList Mgr
tlPortMgr (320) - TL Port Manager
portMgr (328) - Port Manager
fportServer (336) - FPort Server
portChMgr (344) - Port Channel Mgr
mpls (352) - MPLS
tftpLib (360) - TFTP Library
wwnMgr (368) - WWN Mgr
fcc (376), - FCC Process
qosMgr (384) - QOS Mgr
vhba (392) - VHBA
procMgr (400) - Proc Mgr
vedbMgr (408) - VEBD Mgr
span (416) - SPAN
vrrpMgr (424) - VRRP Mgr
fcfwd (432) - FCFWD
ntp (440) - NTP
pltmfmMgr (448) - Platform Mgr
xbarClient (456) - XBAR Client
vrrpEngine (464) - VRRP Engine
callhome (472) - Callhome
ipsMgr (480) - IPS Mgr
fc2 (488) - FC2
debugLib (496) - Debug Library
vpm (504) - VPM
mcast (512) - Multicast
rdl (520) - RDL
rscn (536) - RSCN
bootvar (552) - BootVar
pss (576) - Persistent Storage System
snmp (584) - SNMP
security (592) - Security
vhbad (608) - VHBAD
dns (648) - DNS
rib (656) - RIB
vshd (672) - VSH Daemon
fvpd (688) - Fabric Virtual Port Daemon
mplsTunnel (816) - MPLS Tunnel
cdpd (848) - CDP Daemon
ohmsd (920) - OHMs Daemon
portSec (960) - Port Security Manager
ethPortMgr (976) - Ethernet Port Manager
ipaclMgr (1016) - IP ACL Manager
ficonMgr (1064) - FICON Manager
ficonContDev (1096)- Ficon Control Device
rlir (1128) - RLIR Module
fdmi (1136) - Fabric Device Management Interface
licmgr (1152) - License Manager
fcspmgr (1160) - FCSP Manager
confCheck (1192) - Configuration Check
ivr (1232) - Inter-VSAN Routing
aaad (1240) - AAA Daemon
tacacsd (1248) - TACACS Daemon
radiusd (1256) - Radius Daemon
fc2d (1320) - FC2 Daemon
lcohmsd (1336) - LC Ohms Daemon
isns (1344) - iSNS
ficonStat (1352) - FICON Statistics,
featureMgr (1360) - Feature Manager
lttd (1376) - LTT Daemon
fccLc (1392) - linecard FCC
cfs (1432) - Cisco Fabric Services
dstats (1448) - Delta Statistics
ipsec (1456) - IP Sec
dpvm (1480) - Dynamic Port Vsan Mgr
ike (1488) - IKE
ddas (1504) - DDAS
scheduler (1512) - scheduler
sanExtTuner (1520) - SAN extension Tuner."REFERENCE"RFC 3164 - The BSD Syslog Protocol, Section 4."SYNTAXINTEGER{
kernel (0),-- Kerneluser (8),-- User Levelmail (16),-- Mail Systemdaemon(24),-- System Daemonauth (32),-- Security/Authorizationsyslog (40),-- Internal Syslogdlpr (48),-- Line Printer subsystemnews (56),-- Network New subsystemuucp (64),-- UUCP subsystemcron (72),-- Clock Daemon
authPriv (80),-- Security/Auth(private)ftp (88),-- FTP Daemonlocal0 (128),-- Reserved local uselocal1 (136),-- Reserved local uselocal2 (144),-- Reserved local uselocal3 (152),-- Reserved local uselocal4 (160),-- Reserved local uselocal5 (168),-- Reserved local uselocal6 (176),-- Reserved local uselocal7 (184),-- Reserved local use
vsanMgr (200),-- VSAN Managerfspf (208),-- FSPFdomainMgr (216),-- Domain ManagermtsDaemon (224),-- MTS DaemonlinecardMgr (232),-- Line Card MgrsysMgr (240),-- System ManagersysMgrLib (248),-- System Mgr LibraryzoneServer (256),-- Zone ServervirtualIfMgr (264),-- VirtualInterface MgripConfMgr (272),-- IP Config Manageripfc (280),-- IP Over FC
xBarMgr (288),-- Xbar ManagerfcDns (296),-- Fibre Channel DNSfabricConfMgr (304),-- Fabric Config ServeraclMgr (312),-- AccessControlList MgrtlPortMgr (320),-- TL Port ManagerportMgr (328),-- Port ManagerfportServer (336),-- FPort ServerportChMgr (344),-- Port Channel Mgrmpls (352),-- MPLStftpLib (360),-- TFTP Library
wwnMgr (368),-- WWN Mgrfcc (376),-- FCC ProcessqosMgr (384),-- QOS Mgrvhba (392),-- VHBAprocMgr (400),-- Proc MgrvedbMgr (408),-- VEBD Mgrspan (416),-- SPANvrrpMgr (424),-- VRRP Mgrfcfwd (432),-- FCFWDntp (440),-- NTP
pltmfmMgr (448),-- Platform MgrxbarClient (456),-- XBAR ClientvrrpEngine (464),-- VRRP Enginecallhome (472),-- CallhomeipsMgr (480),-- IPS Mgrfc2 (488),-- FC2debugLib (496),-- Debug Libraryvpm (504),-- VPMmcast (512),-- Multicastrdl (520),-- RDLrscn (536),-- RSCN
bootvar (552),-- BootVarpss (576),-- Persistent Storage-- Systemsnmp (584),-- SNMPsecurity (592),-- Securityvhbad (608),-- VHBADdns (648),-- DNSrib (656),-- RIBvshd (672),-- VSH Daemonfvpd (688),-- Fabric Virtual Port-- Daemon
mplsTunnel (816),-- MPLS Tunnelcdpd (848),-- CDP Daemonohmsd (920),-- OHMs DaemonportSec (960),-- Port Security ManagerethPortMgr (976),-- Ethernet Port ManageripaclMgr (1016),-- IP ACL ManagerficonMgr (1064),-- FICON ManagerficonContDev (1096),-- Ficon Control Devicerlir (1128),-- RLIR Modulefdmi (1136),-- Fabric Device
-- Management Interfacelicmgr (1152),-- License Managerfcspmgr (1160),-- FCSP ManagerconfCheck (1192),-- Configuration Checkivr (1232),-- Inter-VSAN Routingaaad (1240),-- AAA Daemontacacsd (1248),-- TACACS Daemonradiusd (1256),-- Radius Daemonfc2d (1320),-- FC2 Daemonlcohmsd (1336),-- LC Ohms Daemonisns (1344),-- iSNS
ficonStat (1352),-- FICON Statistics,featureMgr (1360),-- Feature Managerlttd (1376),-- LTT DaemonfccLc (1392),-- linecard FCCcfs (1432),-- Cisco Fabric Servicesdstats (1448),-- Delta Statisticsipsec (1456),-- IP Secdpvm (1480),-- Dynamic Port Vsan Mgrike (1488),-- IKEddas (1504),-- DDAS
scheduler (1512),-- schedulersanExtTuner (1520)-- SAN extension Tuner}SyslogProtocol ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The protocol used for sending syslog
messages to syslog server.
tcp (6) - TCP
udp (17) - UDP."SYNTAXINTEGER{tcp (6),udp (17)}-- Syslog Configuration Group
-- This group provides the System log (Syslog) configuration options.cseSyslogConsoleEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicate whether the Syslog messages should be
sent to the console."DEFVAL{ false }::={ cseSyslogConfigurationGroup 1}cseSyslogConsoleMsgSeverity OBJECT-TYPESYNTAX SyslogSeverity
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum severity of the message that are sent to
the Console."DEFVAL{ debug }::={ cseSyslogConfigurationGroup 2}cseSyslogLogFileName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(0..255))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Name of file to which the Syslog messages are
logged. Set operation with a zero length will
fail."DEFVAL{"messages"}::={ cseSyslogConfigurationGroup 3}cseSyslogLogFileMsgSeverity OBJECT-TYPESYNTAX SyslogSeverity
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum severity of the message that are sent to
the log file (cseSyslogLogFileName)."DEFVAL{ debug }::={ cseSyslogConfigurationGroup 4}cseSyslogFileLoggingDisable OBJECT-TYPESYNTAXINTEGER{true (1),noOp (2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether the Syslog messages should be
sent to the file indicated by cseSyslogLogFileName.
Once this object is set to 'true', the Syslog messages
are no longer sent to the file. The value of
'cseSyslogLogFileName' is set to zero length string.
To restart the file logging, the cseSyslogLogFileName
should be set to a valid file name.
No action is taken if this object is set to 'noOp'.
The value of the object when read is always 'noOp'."::={ cseSyslogConfigurationGroup 5}cseSyslogServerTableMaxEntries OBJECT-TYPESYNTAXUnsigned32(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum number of entries that the agent supports
in the cseSyslogServerTable."::={ cseSyslogConfigurationGroup 6}--
-- cseSyslogServerTable
--cseSyslogServerTable OBJECT-TYPESYNTAXSEQUENCEOF CseSyslogServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains all the Syslog servers which are
configured."::={ cseSyslogConfigurationGroup 7}cseSyslogServerEntry OBJECT-TYPESYNTAX CseSyslogServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing information about a
Syslog server."INDEX{ cseSyslogServerIndex}::={ cseSyslogServerTable 1}
CseSyslogServerEntry ::=SEQUENCE{
cseSyslogServerIndex Unsigned32,
cseSyslogServerAddressType InetAddressType,
cseSyslogServerAddress InetAddress,
cseSyslogServerMsgSeverity SyslogSeverity,
cseSyslogServerStatus RowStatus,
cseSyslogServerFacility SyslogFacility,
cseSyslogServerProtocol SyslogProtocol,
cseSyslogServerPort InetPortNumber,
cseSyslogServerProtocolFallback SyslogProtocol
}cseSyslogServerIndex OBJECT-TYPESYNTAXUnsigned32(1..65535)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An arbitrary integer value, greater than zero, and
less than and equal to cseSyslogServerTableMaxEntries,
which identifies a Syslog server row in this table."::={ cseSyslogServerEntry 1}cseSyslogServerAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The type of the address of the Syslog server which is
given by the corresponding value of
cseSyslogServerAddress."::={ cseSyslogServerEntry 2}cseSyslogServerAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The address of the Syslog server."::={ cseSyslogServerEntry 3}cseSyslogServerMsgSeverity OBJECT-TYPESYNTAX SyslogSeverity
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Minimum severity of the message that are sent to
this Syslog server."DEFVAL{debug}::={ cseSyslogServerEntry 4}cseSyslogServerStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrent
DESCRIPTION"The status of this row.
A row can not become 'active' until the values for
cseSyslogServerAddressType and cseSyslogServerAddress in
that row have both been set.
A row cannot be created until corresponding instances
of following objects are instantiated.
- cseSyslogServerAddressType
- cseSyslogServerAddress
The following objects may not be modified while the
value of this object is active (1):
- cseSyslogServerAddressType
- cseSyslogServerAddress."::={ cseSyslogServerEntry 5}cseSyslogServerFacility OBJECT-TYPESYNTAX SyslogFacility
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The facility to be used when sending Syslog messages to
this server."DEFVAL{local7}::={ cseSyslogServerEntry 6}cseSyslogServerProtocol OBJECT-TYPESYNTAX SyslogProtocol
MAX-ACCESSread-create
STATUScurrentDESCRIPTION"The transport protocol used for sending syslog messages
to syslog server."DEFVAL{ udp }::={ cseSyslogServerEntry 7}cseSyslogServerPort OBJECT-TYPESYNTAXInetPortNumber(1..65535)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The port number of the syslog server to
which syslog messages are sent.
The default value in case of 'cseSyslogServerProtocol'
value of 'udp' is 514.
The default value in case of 'cseSyslogServerProtocol'
value of 'tcp' is 1468."::={ cseSyslogServerEntry 8}cseSyslogServerProtocolFallback OBJECT-TYPESYNTAX SyslogProtocol
MAX-ACCESSread-createSTATUScurrent
DESCRIPTION"This object is used for specifying the
protcol to fallback to if the sending of
syslog messages using the protocol configured
in 'cseSyslogServerProtocol' fails.
If the value of this object is same as
the value specified in 'cseSyslogServerProtocol',
then protocol fallback in case of failure is not
supported."DEFVAL{ udp }::={ cseSyslogServerEntry 9}--
-- cseSyslogMessageControlTable
--cseSyslogMessageControlTable OBJECT-TYPESYNTAXSEQUENCEOF CseSyslogMessageControlEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the information about what system
log messages should be sent to Syslog host, console,
log file, and/or logged into the internal buffer."::={ cseSyslogConfigurationGroup 8}cseSyslogMessageControlEntry OBJECT-TYPESYNTAX CseSyslogMessageControlEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A system log message control table entry.
Each entry specifies a severity for a particular
'facility' which generates Syslog messages. Any
generated message which is at least as severe as
the specified severity will be logged."INDEX{ cseSyslogMessageFacility }::={ cseSyslogMessageControlTable 1}
CseSyslogMessageControlEntry ::=SEQUENCE{
cseSyslogMessageFacility
SyslogExFacility,
cseSyslogMessageSeverity
SyslogSeverity
}cseSyslogMessageFacility OBJECT-TYPESYNTAX SyslogExFacility
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"System log message facility."::={ cseSyslogMessageControlEntry 1}cseSyslogMessageSeverity OBJECT-TYPESYNTAX SyslogSeverity
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum severity of the message that are generated by
this Syslog message facility."::={ cseSyslogMessageControlEntry 2}cseSyslogTerminalEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicate whether the Syslog messages should be
sent to the terminals."DEFVAL{ false }::={ cseSyslogConfigurationGroup 9}cseSyslogTerminalMsgSeverity OBJECT-TYPESYNTAX SyslogSeverity
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum severity of the message that are sent to
the terminals."DEFVAL{ debug }::={ cseSyslogConfigurationGroup 10}cseSyslogLinecardEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicate whether the Syslog messages should be
generated at the line cards."DEFVAL{ false }::={ cseSyslogConfigurationGroup 11}cseSyslogLinecardMsgSeverity OBJECT-TYPESYNTAX SyslogSeverity
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum severity of the message that are sent from
linecards."DEFVAL{ debug }::={ cseSyslogConfigurationGroup 12}
-- ConformanceciscoSyslogExtMIBConformance
OBJECTIDENTIFIER::={ ciscoSyslogExtMIB 2}ciscoSyslogExtMIBCompliances
OBJECTIDENTIFIER::={ ciscoSyslogExtMIBConformance 1}ciscoSyslogExtMIBGroups
OBJECTIDENTIFIER::={ ciscoSyslogExtMIBConformance 2}ciscoSyslogExtMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which
implement the CISCO-SYSLOG-EXT-MIB."MODULEMANDATORY-GROUPS{ ciscoSyslogExtGroup }OBJECT cseSyslogServerAddressType
SYNTAXINTEGER{
ipv4 (1),
dns (16)}DESCRIPTION"Only dns and ipv4 addresses are need to be
supported."OBJECT cseSyslogServerStatus
SYNTAXINTEGER{
active (1),
createAndGo (4),
destroy (6)}DESCRIPTION"Only three values 'createAndGo', 'destroy' and
'active' need to be supported."OBJECT cseSyslogLinecardEnable
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT cseSyslogLinecardMsgSeverity
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."-- OBJECT cseSyslogMessageFacility
-- SYNTAX SyslogFacility
-- DESCRIPTION
-- "Only the standard facilities need to be supported."::={ ciscoSyslogExtMIBCompliances 1}
ciscoSyslogExtMIBComplianceRev2 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which
implement the CISCO-SYSLOG-EXT-MIB."MODULEMANDATORY-GROUPS{ ciscoSyslogExtGroup }GROUP ciscoSyslogProtocolGroup
DESCRIPTION"The implementation of this group is mandatory
in case of systems where different protcol type
can be supported for sending syslog messages."OBJECT cseSyslogServerAddressType
SYNTAXINTEGER{
ipv4 (1),
dns (16)}DESCRIPTION"Only dns and ipv4 addresses are need to be
supported."OBJECT cseSyslogServerStatus
SYNTAXINTEGER{
active (1),
createAndGo (4),
destroy (6)}DESCRIPTION"Only three values 'createAndGo', 'destroy' and
'active' need to be supported."OBJECT cseSyslogLinecardEnable
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."OBJECT cseSyslogLinecardMsgSeverity
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required."-- OBJECT cseSyslogMessageFacility
-- SYNTAX SyslogFacility
-- DESCRIPTION
-- "Only the standard facilities need to be supported."::={ ciscoSyslogExtMIBCompliances 2}-- Units of ConformanceciscoSyslogExtGroup OBJECT-GROUPOBJECTS{ cseSyslogConsoleEnable,
cseSyslogLogFileName,
cseSyslogFileLoggingDisable,
cseSyslogConsoleMsgSeverity,
cseSyslogLogFileMsgSeverity,
cseSyslogServerTableMaxEntries,
cseSyslogServerAddress,
cseSyslogServerAddressType,
cseSyslogServerMsgSeverity,
cseSyslogServerStatus,
cseSyslogServerFacility,
cseSyslogMessageSeverity,
cseSyslogTerminalEnable,
cseSyslogTerminalMsgSeverity,
cseSyslogLinecardEnable,
cseSyslogLinecardMsgSeverity
}STATUScurrentDESCRIPTION"A collection of objects for Syslog management."::={ ciscoSyslogExtMIBGroups 1}ciscoSyslogProtocolGroup OBJECT-GROUPOBJECTS{
cseSyslogServerProtocol,
cseSyslogServerPort,
cseSyslogServerProtocolFallback
}STATUScurrentDESCRIPTION
"A collection of objects referring to
protocol related objects in syslog configuration."::={ ciscoSyslogExtMIBGroups 2}END